佛山市万庆物资有限公司

标题: 马钢镀锌角钢镀锌三角铁工地用冲孔角铁表面光亮壁厚均匀 [打印本页]

作者: fsminQ    时间: 2021-12-1 16:08
标题: 马钢镀锌角钢镀锌三角铁工地用冲孔角铁表面光亮壁厚均匀
角钢的标准通常用边长和边厚的尺度表示。目前国产角钢标准为2—20号,以边长的厘米数为号数,同一号角钢常有2—7种不同的边厚。
进口角钢标明两边的实践尺度及边厚并注明相关标准。一般边长12.5cm以上的为大型角钢12.5cm5cm之间的为中型角钢,边长5cm以下的为小型角钢。
The standards of angle steel are usually expressed by the scales of edge length and edge thickness.At present, the domestic corner steel standard is 2-20,
with the side length of centimeters as the number, the same horn steel often has 2-7 kinds of different side thickness.Import angle steel indicates the practical scale
and edge thickness of both sides and indicates the relevant standards.General edge length above 12.5cm is large corner steel, between 12.5cm-5cm,
and edge length below 5cm is small corner steel.

(, 下载次数: 7)
注:关于本产品标题,由于商品标题搜索功能的特性,为方便采购方的购物搜索,所起标题关键词仅适用于搜索功能,不涉及广告宣传和功能描述。
温馨提示:由于现货市场浮动较大,店铺所有规格均为参考价格,具体报价请咨询客服,谢谢!
(, 下载次数: 9)






欢迎光临 佛山市万庆物资有限公司 (http://wanqingwuzi.com/) Powered by Discuz! X3.4