佛山市万庆物资有限公司
标题: 宝钢汽车零部件钢材冷轧板黑退冷轧冷硬195冷轧钢加工分切 [打印本页]
作者: fsminQ 时间: 2022-2-18 11:52
标题: 宝钢汽车零部件钢材冷轧板黑退冷轧冷硬195冷轧钢加工分切
冷轧板以热轧卷板为原料，冷轧时，轧件是在再结晶温度以下轧制的，一般钢轧件在室温下轧制。含硅量较高的硅钢片，
脆性大塑性低，在冷轧前需要预热至200℃。冷轧卷板生产过程中由于不进行加热，所以不存在热轧常出现的麻点和氧化铁皮等缺陷，
表面质量好、光洁度高。而且冷轧产品的尺寸精度高，产品的性能和组织能满足一些特殊的使用要求，如电磁性能、深冲性能等。
冷轧卷板应用领域很广，如汽车制造、电气产品、机车车辆、航空、精密仪表、食品罐头等。冷轧板一般规格：厚度0.15-3mm，
宽度550-1530mm，卷板外径 Φ1000-2500mm，卷板内径Φ410-610mm。卷和平板差点就是一个裁剪包装。
冷硬卷板是热轧卷板经过酸洗、冷轧得到的。可以说是冷轧板卷的一种。冷轧板卷（退火态）：热轧卷板经过酸洗、冷轧、
罩式退火、平整、（精整）得到的。两者区别主要有三点：1、外观上，一般冷硬卷板有点发微乌。2、表面质量、结构、
尺寸精度等冷轧板要比冷硬卷板要好。3、性能上，由于热轧卷板经过冷轧工序直接得到的冷硬卷板在冷轧时发生加工硬化，
导致屈服强度增加、并残留了部分内应力，外在表现为较“硬”故称冷硬卷板。故屈服强度：冷硬卷板大于冷轧板卷（退火态），
使得冷轧板卷（退火态）更加利于冲压成型。一般冷轧板卷默认的交货状态为退火态。
Cold rolled sheet takes hot rolled coil as raw material. During cold rolling, the rolled piece is rolled below the recrystallization temperature.
Generally, the steel rolled piece is rolled at room temperature. Silicon steel sheet with high silicon content has high brittleness and low plasticity.
It needs to be preheated to 200 ℃ before cold rolling. Due to no heating in the production process of cold rolled coil,
there are no defects such as pitting and iron oxide scale often occurred in hot rolling, with good surface quality and high finish. Moreover,
the dimensional accuracy of cold rolled products is high,
and the performance and structure of products can meet some special application requirements, such as electromagnetic performance,
deep drawing performance and so on. Cold rolled coil has a wide range of applications, such as automobile manufacturing, electrical products,
rolling stock, aviation, precision instruments, food cans and so on. General specification of cold rolled sheet: thickness 0.15-3mm,
width 550-1530mm, outer diameter of coil Φ 1000-2500mm, inner diameter of coiled plate Φ 410-610mm。
The roll and tablet are almost a cut package. Cold hardening coil is obtained by pickling and cold rolling hot-rolled coil.
It can be said to be a kind of cold rolled coil. Cold rolled coil (annealed): hot rolled coil is obtained by pickling, cold rolling, bell annealing,
leveling and finishing. There are three main differences between the two: 1. In appearance, the general cold and hard coil is a little dark. 2.
The surface quality, structure and dimensional accuracy of cold-rolled sheet are better than cold-rolled sheet. 3. In terms of performance,
the cold hard coil directly obtained from the cold rolling process of hot-rolled coil has work hardening during cold rolling,
resulting in increased yield strength and residual part of internal stress, which is externally "hard", so it is called cold hard coil.
Therefore, the yield strength: the cold-rolled coil is greater than the cold-rolled coil (annealed state),
which makes the cold-rolled coil (annealed state) more conducive to stamping forming. Generally,
the default delivery status of cold rolled coil is annealed.
(, 下载次数: 371)
发票说明：当前价格不含税，开票另加税点，详细咨询客服！
注：关于本产品标题，由于商品标题搜索功能的特性，为方便采购方的购物搜索，所起标题关键词仅适用于搜索功能，不涉及广告宣传和功能描述。
温馨提示：由于现货市场浮动较大，店铺所有规格均为参考价格，具体报价请咨询客服，谢谢！
| 欢迎光临 佛山市万庆物资有限公司 (http://wanqingwuzi.com/) |
Powered by Discuz! X3.4 |
